dmesg - Dual Opteron 4180
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.2.0-2-amd64 (Debian 3.2.19-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Fri Jun 1 17:49:08 UTC 2012
Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/jmpnet1-root ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000df699000 (usable)
BIOS-e820: 00000000df699000 - 00000000df6af000 (reserved)
BIOS-e820: 00000000df6af000 - 00000000df6ce000 (ACPI data)
BIOS-e820: 00000000df6ce000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fe000000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fec94000 - 00000000fecd0000 (reserved)
BIOS-e820: 00000000fecd4000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: Dell Inc. PowerEdge R415/0GXH08, BIOS 1.8.6 12/06/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 000100000000 mask FFFF00000000 write-back
4 base 000200000000 mask FFFFE0000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 0000000220000000 aka 8704M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xdf699 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000fe710] fe710
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff880000099000] 99000 size 20480
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000df699000
0000000000 - 00c0000000 page 1G
00c0000000 - 00df600000 page 2M
00df600000 - 00df699000 page 4k
kernel direct mapping tables up to df699000 @ 1fffd000-20000000
init_memory_mapping: 0000000100000000-0000000220000000
0100000000 - 0200000000 page 1G
0200000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ df697000-df699000
RAMDISK: 3686c000 - 3742e000
ACPI: RSDP 00000000000f1040 00024 (v02 DELL )
ACPI: XSDT 00000000000f10c8 000A4 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000df6bbcf4 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20110623/tbfadt-610)
ACPI: DSDT 00000000df6af000 065E6 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000df6be000 00040
ACPI: APIC 00000000df6bb478 00254 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000df6bb6dc 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000df6bb730 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000df6bb76c 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000df6bb7ac 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000df6bb8e4 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000df6b5788 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000df6b59f8 00354 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000df6b55e8 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000df6b5618 00170 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: IV__ 00000000df6bba68 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000df6bba9c 00190 (v02 AMD AGESA 00000001 AMD 00000001)
ACPI: SLIT 00000000df6bbc58 00030 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SS__ 00000000df6bf000 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000df6bbc8c 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 1 -> APIC 0x08 -> Node 1
SRAT: PXM 1 -> APIC 0x09 -> Node 1
SRAT: PXM 1 -> APIC 0x0a -> Node 1
SRAT: PXM 1 -> APIC 0x0b -> Node 1
SRAT: PXM 1 -> APIC 0x0c -> Node 1
SRAT: PXM 1 -> APIC 0x0d -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-e0000000
SRAT: Node 0 PXM 0 100000000-120000000
SRAT: Node 1 PXM 1 120000000-220000000
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [0,a0000) + [100000,e0000000) -> [0,e0000000)
NUMA: Node 0 [0,e0000000) + [100000000,120000000) -> [0,120000000)
Initmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000011fffb000 - 000000011fffffff]
Initmem setup node 1 0000000120000000-0000000220000000
NODE_DATA [000000021fffa000 - 000000021fffefff]
[ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[ffffea0004000000-ffffea00077fffff] PMD -> [ffff88021b600000-ffff88021edfffff] on node 1
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00220000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000010 -> 0x000000a0
0: 0x00000100 -> 0x000df699
0: 0x00100000 -> 0x00120000
1: 0x00120000 -> 0x00220000
On node 0 totalpages: 1046057
DMA zone: 56 pages used for memmap
DMA zone: 7 pages reserved
DMA zone: 3921 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 896721 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
On node 1 totalpages: 1048576
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x28] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x29] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x2f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x30] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x31] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x32] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x33] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x34] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x35] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x36] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x37] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x38] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x39] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x3f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x40] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0f] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 15, version 33, address 0xfec80000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
SMP: Allowing 64 CPUs, 52 hotplug CPUs
nr_irqs_gsi: 72
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000df699000 - 00000000df6af000
PM: Registered nosave memory: 00000000df6af000 - 00000000df6ce000
PM: Registered nosave memory: 00000000df6ce000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 00000000fec90000
PM: Registered nosave memory: 00000000fec90000 - 00000000fec94000
PM: Registered nosave memory: 00000000fec94000 - 00000000fecd0000
PM: Registered nosave memory: 00000000fecd0000 - 00000000fecd4000
PM: Registered nosave memory: 00000000fecd4000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:10000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:64 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s82304 r8192 d24192 u131072
pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [0] 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
pcpu-alloc: [1] 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63
Built 2 zonelists in Node order, mobility grouping on. Total pages: 2064162
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/jmpnet1-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 6816000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ d4000000
PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
Memory: 8102356k/8912896k available (3405k kernel code, 534364k absent, 276176k reserved, 3327k data, 568k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:33024 nr_irqs:1736 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2600.470 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.94 BogoMIPS (lpj=10401880)
pid_max: default: 65536 minimum: 512
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00df800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
ACPI: Core revision 20110623
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Opteron(tm) Processor 4180 stepping 01
Performance Events: Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR c0010000 is 1430076)
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 1, Processors #1
smpboot cpu 1: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #2
smpboot cpu 2: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #3
smpboot cpu 3: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #4
smpboot cpu 4: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #5
smpboot cpu 5: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #6
smpboot cpu 6: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #7
smpboot cpu 7: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #8
smpboot cpu 8: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #9
smpboot cpu 9: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 0, Processors #10
smpboot cpu 10: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Ok.
Booting Node 1, Processors #11
smpboot cpu 11: start_ip = 99000
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 12 CPUs
Total of 12 processors activated (62402.07 BogoMIPS).
devtmpfs: initialized
print_constraints: dummy:
NET: Registered protocol family 16
node 0 link 1: io port [e000, ffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xf0000000-0xf3ffffff]
node 0 link 1: mmio [e9800000, e9ffffff]
node 0 link 1: mmio [ea000000, ef2fffff]
node 0 link 1: mmio [fec80000, fecbffff]
TOM2: 0000000220000000 aka 8704M
bus: [00, 3f] on node 0 link 1
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0xe0000000-0xefffffff]
bus: 00 index 2 [mem 0xf4000000-0xffffffff]
bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
Extended Config Space enabled on 2 nodes
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0xe000-0xffff]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xfec00000-0xfec7ffff]
pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff]
pci_root PNP0A08:00: host bridge window [mem 0xea000000-0xef2fffff]
pci_root PNP0A08:00: host bridge window [mem 0xe9800000-0xe9ffffff]
pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [1002:5a12] type 0 class 0x000600
pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:09.0: [1002:5a1c] type 1 class 0x000604
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
pci 0000:00:11.0: reg 10: [io 0xecd0-0xecd7]
pci 0000:00:11.0: reg 14: [io 0xecf0-0xecf3]
pci 0000:00:11.0: reg 18: [io 0xecd8-0xecdf]
pci 0000:00:11.0: reg 1c: [io 0xecf4-0xecf7]
pci 0000:00:11.0: reg 20: [io 0xecb0-0xecbf]
pci 0000:00:11.0: reg 24: [mem 0xef2ff800-0xef2ffbff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xef2fb000-0xef2fbfff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xef2fc000-0xef2fcfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xef2ffe00-0xef2ffeff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xef2fd000-0xef2fdfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xef2fe000-0xef2fefff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xef2fff00-0xef2fffff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io 0xece0-0xece7]
pci 0000:00:14.1: reg 14: [io 0xecf8-0xecfb]
pci 0000:00:14.1: reg 18: [io 0xece8-0xecef]
pci 0000:00:14.1: reg 1c: [io 0xecfc-0xecff]
pci 0000:00:14.1: reg 20: [io 0xecc0-0xeccf]
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
pci 0000:00:19.0: [1022:1200] type 0 class 0x000600
pci 0000:00:19.1: [1022:1201] type 0 class 0x000600
pci 0000:00:19.2: [1022:1202] type 0 class 0x000600
pci 0000:00:19.3: [1022:1203] type 0 class 0x000600
pci 0000:00:19.4: [1022:1204] type 0 class 0x000600
pci 0000:01:00.0: [1000:0072] type 0 class 0x000107
pci 0000:01:00.0: reg 10: [io 0xfc00-0xfcff]
pci 0000:01:00.0: reg 14: [mem 0xef1f0000-0xef1fffff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0xef180000-0xef1bffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xef000000-0xef0fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xf000-0xffff]
pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff]
pci 0000:02:00.0: [14e4:163b] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xea000000-0xebffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [14e4:163b] type 0 class 0x000200
pci 0000:02:00.1: reg 10: [mem 0xec000000-0xedffffff 64bit]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff]
pci 0000:03:04.0: [102b:0532] type 0 class 0x000300
pci 0000:03:04.0: reg 10: [mem 0xe9800000-0xe9ffffff pref]
pci 0000:03:04.0: reg 14: [mem 0xeeffc000-0xeeffffff]
pci 0000:03:04.0: reg 18: [mem 0xee000000-0xee7fffff]
pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff]
pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xe000-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0x0fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfec00000-0xfec7ffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfec80000-0xfecbffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xea000000-0xef2fffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
pci0000:00: Requesting ACPI _OSC control (0x15)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LN24] (IRQs *24)
ACPI: PCI Interrupt Link [LN25] (IRQs *25)
ACPI: PCI Interrupt Link [LN26] (IRQs *26)
ACPI: PCI Interrupt Link [LN27] (IRQs *27)
ACPI: PCI Interrupt Link [LN28] (IRQs *28)
ACPI: PCI Interrupt Link [LN29] (IRQs *29)
ACPI: PCI Interrupt Link [LN30] (IRQs *30)
ACPI: PCI Interrupt Link [LN31] (IRQs *31)
ACPI: PCI Interrupt Link [LN32] (IRQs *32)
ACPI: PCI Interrupt Link [LN33] (IRQs *33)
ACPI: PCI Interrupt Link [LN34] (IRQs *34)
ACPI: PCI Interrupt Link [LN35] (IRQs *35)
ACPI: PCI Interrupt Link [LN36] (IRQs *36)
ACPI: PCI Interrupt Link [LN37] (IRQs *37)
ACPI: PCI Interrupt Link [LN38] (IRQs *38)
ACPI: PCI Interrupt Link [LN39] (IRQs *39)
ACPI: PCI Interrupt Link [LN40] (IRQs *40)
ACPI: PCI Interrupt Link [LN41] (IRQs *41)
ACPI: PCI Interrupt Link [LN42] (IRQs *42)
ACPI: PCI Interrupt Link [LN43] (IRQs *43)
ACPI: PCI Interrupt Link [LN44] (IRQs *44)
ACPI: PCI Interrupt Link [LN45] (IRQs *45)
ACPI: PCI Interrupt Link [LN46] (IRQs *46)
ACPI: PCI Interrupt Link [LN47] (IRQs *47)
ACPI: PCI Interrupt Link [LN48] (IRQs *48)
ACPI: PCI Interrupt Link [LN49] (IRQs *49)
ACPI: PCI Interrupt Link [LN50] (IRQs *50)
ACPI: PCI Interrupt Link [LN51] (IRQs *51)
ACPI: PCI Interrupt Link [LN52] (IRQs *52)
ACPI: PCI Interrupt Link [LN53] (IRQs *53)
ACPI: PCI Interrupt Link [LN54] (IRQs *54)
ACPI: PCI Interrupt Link [LN55] (IRQs *55)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:03:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:04.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
Expanded resource reserved due to conflict with reserved
reserve RAM buffer: 00000000df699000 - 00000000dfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0xe000-0xffff window]
pnp 00:00: [io 0x0d00-0x0fff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0xfec00000-0xfec7ffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0xfec80000-0xfecbffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: [mem 0xea000000-0xef2fffff window]
pnp 00:00: [mem 0xe9800000-0xe9ffffff window]
pnp 00:00: [mem 0xfed40000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0080-0x009f]
pnp 00:01: [io 0x0000-0x001f]
pnp 00:01: [io 0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io 0x00f0-0x00ff]
pnp 00:02: [irq 13]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: [io 0x0061]
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [io 0x0070-0x007f]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0x02f8-0x02ff]
pnp 00:06: [irq 3]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [io 0x0800-0x087f]
pnp 00:07: [io 0x0900-0x093f]
pnp 00:07: [io 0x0d00-0x0dfe]
pnp 00:07: [io 0x0dff]
pnp 00:07: [io 0x0e00-0x0efe]
pnp 00:07: [io 0x0eff]
pnp 00:07: [io 0x040b]
pnp 00:07: [io 0x04d6]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0c00-0x0c01]
pnp 00:07: [io 0x0c14]
pnp 00:07: [io 0x0c50-0x0c52]
pnp 00:07: [io 0x0c6c]
pnp 00:07: [io 0x0c6f]
pnp 00:07: [io 0x0cd0-0x0cd1]
pnp 00:07: [io 0x0cd2-0x0cd3]
pnp 00:07: [io 0x0cd4-0x0cd5]
pnp 00:07: [io 0x0cd6-0x0cd7]
pnp 00:07: [io 0x0cd8-0x0cdb]
pnp 00:07: [io 0x0cdc-0x0cdf]
pnp 00:07: [io 0x00e0-0x00e3]
pnp 00:07: [io 0x00e4-0x00e7]
pnp 00:07: [io 0x0ca0-0x0ca7]
pnp 00:07: [io 0x0ca9-0x0cab]
pnp 00:07: [io 0x0cad-0x0caf]
pnp 00:07: [io 0x0cb0-0x0cb7]
pnp 00:07: [io 0x0060]
pnp 00:07: [io 0x0064]
pnp 00:07: [io 0x0950]
system 00:07: [io 0x0800-0x087f] has been reserved
system 00:07: [io 0x0900-0x093f] has been reserved
system 00:07: [io 0x0d00-0x0dfe] has been reserved
system 00:07: [io 0x0dff] has been reserved
system 00:07: [io 0x0e00-0x0efe] has been reserved
system 00:07: [io 0x0eff] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdb] has been reserved
system 00:07: [io 0x0cdc-0x0cdf] has been reserved
system 00:07: [io 0x0ca0-0x0ca7] has been reserved
system 00:07: [io 0x0ca9-0x0cab] has been reserved
system 00:07: [io 0x0cad-0x0caf] has been reserved
system 00:07: [io 0x0cb0-0x0cb7] has been reserved
system 00:07: [io 0x0950] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io 0x0ca8]
pnp 00:08: [io 0x0cac]
pnp 00:08: [irq 0 disabled]
system 00:08: [io 0x0ca8] has been reserved
system 00:08: [io 0x0cac] has been reserved
system 00:08: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
pnp 00:09: [mem 0xfed40000-0xfed44fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp 00:0a: [mem 0xfed00000-0xfed003ff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: bridge window [io 0xf000-0xffff]
pci 0000:00:02.0: bridge window [mem 0xef000000-0xef1fffff]
pci 0000:00:09.0: PCI bridge to [bus 02-02]
pci 0000:00:09.0: bridge window [mem 0xea000000-0xedffffff]
pci 0000:00:14.4: PCI bridge to [bus 03-03]
pci 0000:00:14.4: bridge window [mem 0xee000000-0xeeffffff]
pci 0000:00:14.4: bridge window [mem 0xe9800000-0xe9ffffff pref]
ACPI: PCI Interrupt Link [LN52] enabled at IRQ 52
pci 0000:00:02.0: PCI INT A -> Link[LN52] -> GSI 52 (level, high) -> IRQ 52
pci 0000:00:02.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LN53] enabled at IRQ 53
pci 0000:00:09.0: PCI INT A -> Link[LN53] -> GSI 53 (level, high) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0xe000-0xffff]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 10 [mem 0xfec00000-0xfec7ffff]
pci_bus 0000:00: resource 11 [mem 0xfec80000-0xfecbffff]
pci_bus 0000:00: resource 12 [mem 0xea000000-0xef2fffff]
pci_bus 0000:00: resource 13 [mem 0xe9800000-0xe9ffffff]
pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 0 [io 0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff]
pci_bus 0000:02: resource 1 [mem 0xea000000-0xedffffff]
pci_bus 0000:03: resource 1 [mem 0xee000000-0xeeffffff]
pci_bus 0000:03: resource 2 [mem 0xe9800000-0xe9ffffff pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io 0xe000-0xffff]
pci_bus 0000:03: resource 8 [io 0x0d00-0x0fff]
pci_bus 0000:03: resource 9 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 10 [mem 0xfec00000-0xfec7ffff]
pci_bus 0000:03: resource 11 [mem 0xfec80000-0xfecbffff]
pci_bus 0000:03: resource 12 [mem 0xea000000-0xef2fffff]
pci_bus 0000:03: resource 13 [mem 0xe9800000-0xe9ffffff]
pci_bus 0000:03: resource 14 [mem 0xfed40000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.0: PCI INT A disabled
pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:12.1: PCI INT A disabled
pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.2: PCI INT B disabled
pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.0: PCI INT A disabled
pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:13.1: PCI INT A disabled
pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:13.2: PCI INT B disabled
pci 0000:03:04.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12040k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ d4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink socket (disabled)
type=2000 audit(1339716843.576:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15977
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 72 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
pcieport 0000:00:09.0: irq 73 for MSI/MSI-X
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
Mobile IPv6
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-06-14 23:34:04 UTC (1339716844)
Initializing network drop monitor service
Freeing unused kernel memory: 568k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 672k freed
Freeing unused kernel memory: 664k freed
udevd[126]: starting version 175
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
mpt2sas version 10.100.00.00 loaded
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xef2ffe00
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
ACPI: PCI Interrupt Link [LN48] enabled at IRQ 48
bnx2 0000:02:00.0: PCI INT A -> Link[LN48] -> GSI 48 (level, high) -> IRQ 48
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ea000000, IRQ 48, node addr 60:eb:69:8f:38:b8
ACPI: PCI Interrupt Link [LN49] enabled at IRQ 49
scsi0 : Fusion MPT SAS Host
bnx2 0000:02:00.1: PCI INT B -> Link[LN49] -> GSI 49 (level, high) -> IRQ 49
bnx2 0000:02:00.1: setting latency timer to 64
ACPI: PCI Interrupt Link [LN24] enabled at IRQ 24
mpt2sas 0000:01:00.0: PCI INT A -> Link[LN24] -> GSI 24 (level, high) -> IRQ 24
mpt2sas 0000:01:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (8182252 kB)
mpt2sas 0000:01:00.0: irq 74 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 74
mpt2sas0: iomem(0x00000000ef1f0000), mapped(0xffffc90005980000), size(65536)
mpt2sas0: ioport(0x000000000000fc00), size(256)
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
bnx2 0000:02:00.1: eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem ec000000, IRQ 49, node addr 60:eb:69:8f:38:b9
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xef2fff00
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xef2fb000
libata version 3.00 loaded.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xef2fc000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xef2fd000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xef2fe000
mpt2sas0: sending diag reset !!
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xef2ff800 port 0xef2ffa80 irq 22
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi5 : pata_atiixp
scsi6 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0xece0 ctl 0xecf8 bmdma 0xecc0 irq 16
ata6: PATA max UDMA/100 cmd 0xece8 ctl 0xecfc bmdma 0xecc8 irq 16
usb 1-3: new high-speed USB device number 3 using ehci_hcd
ata5.00: ATAPI: TSSTcorp DVD+/-RW TS-L633J, D150, max UDMA/100
ata5.00: limited to UDMA/33 due to 40-wire cable
ata5.00: configured for UDMA/33
Refined TSC clocksource calibration: 2600.030 MHz.
Switching to clocksource tsc
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
scsi 5:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633J D150 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
usb 4-1: new low-speed USB device number 2 using ohci_hcd
usb 4-1: New USB device found, idVendor=046d, idProduct=c31c
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Keyboard
usb 4-1: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input0
generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.1-1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input1
generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-1: new full-speed USB device number 2 using ohci_hcd
mpt2sas0: diag reset: SUCCESS
usb 3-1: New USB device found, idVendor=051d, idProduct=0003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Smart-UPS 1500 FW:UPS 06.5 / ID=18
usb 3-1: Manufacturer: American Power Conversion
usb 3-1: SerialNumber: AS1140321576
generic-usb 0003:051D:0003.0003: hiddev0,hidraw2: USB HID v1.00 Device [American Power Conversion Smart-UPS 1500 FW:UPS 06.5 / ID=18] on usb-0000:00:12.0-1/input0
mpt2sas0: Allocated physical memory: size(7422 kB)
mpt2sas0: Current Controller Queue Depth(3306), Max Controller Queue Depth(3439)
mpt2sas0: Scatter Gather Elements per IO(128)
usb 1-3.4: new high-speed USB device number 5 using ehci_hcd
usb 1-3.4: New USB device found, idVendor=05dc, idProduct=a740
usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3.4: Product: Gizmo!
usb 1-3.4: Manufacturer: Crucial
usb 1-3.4: SerialNumber: 4SJH4KT1YB0OF4XKMQ71
usbcore: registered new interface driver uas
Initializing USB Mass Storage driver...
scsi7 : usb-storage 1-3.4:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mpt2sas0: LSISAS2008: FWVersion(02.15.63.00), ChipRevision(0x03), BiosVersion(07.01.09.00)
mpt2sas0: Dell PERC H200 Adapter: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1D)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
scsi: waiting for bus probes to complete ...
scsi 7:0:0:0: Direct-Access Crucial Gizmo! 1100 PQ: 0 ANSI: 0 CCS
mpt2sas0: host_add: handle(0x0001), sas_addr(0x5782bcb0158ea300), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA WDC WD2003FYYS-0 1D01 PQ: 0 ANSI: 5
scsi 0:0:0:0: SATA: handle(0x000d), sas_addr(0x4433221107000000), phy(7), device_name(0x4ee050017b1f027a)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x5782bcb0158ea300), slot(0)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
scsi 0:0:1:0: Direct-Access ATA WDC WD2502ABYS-1 3B05 PQ: 0 ANSI: 5
scsi 0:0:1:0: SATA: handle(0x000a), sas_addr(0x4433221104000000), phy(4), device_name(0x4ee15001eaf003b1)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x5782bcb0158ea300), slot(3)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
scsi 0:0:2:0: Direct-Access ATA WDC WD2003FYYS-0 1D01 PQ: 0 ANSI: 5
scsi 0:0:2:0: SATA: handle(0x000b), sas_addr(0x4433221106000000), phy(6), device_name(0x4ee05001b30a027b)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x5782bcb0158ea300), slot(1)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
scsi 0:0:3:0: Direct-Access ATA WDC WD2502ABYS-1 3B05 PQ: 0 ANSI: 5
scsi 0:0:3:0: SATA: handle(0x000c), sas_addr(0x4433221105000000), phy(5), device_name(0x4ee15001df185906)
scsi 0:0:3:0: SATA: enclosure_logical_id(0x5782bcb0158ea300), slot(2)
scsi 0:0:3:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:3:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1)
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:1:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:3:0: [sdd] 488281250 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:2:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 7:0:0:0: [sde] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sde] No Caching mode page present
sd 7:0:0:0: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sde] No Caching mode page present
sd 7:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 73 00 00 08
sd 0:0:3:0: [sdd] Write Protect is off
sd 0:0:3:0: [sdd] Mode Sense: 73 00 00 08
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: [sde] No Caching mode page present
sd 7:0:0:0: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sde] Attached SCSI removable disk
sd 0:0:3:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 73 00 00 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 73 00 00 08
sdb: sdb1
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 0:0:1:0: [sdb] Attached SCSI disk
sd 0:0:3:0: [sdd] Attached SCSI disk
sda: sda1 sda2
sdc: sdc1 sdc2
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
md: raid1 personality registered for level 1
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
mdadm: sending ioctl 800c0910 to a partition!
md: md2 stopped.
md: bind
md: bind
bio: create slab at 1
md/raid1:md2: active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 249997156352
md2: unknown partition table
md: md0 stopped.
md: bind
md: bind
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 9998877696
md0: unknown partition table
md: md1 stopped.
md: bind
md: bind
md: kicking non-fresh sda2 from array!
md: unbind
md: export_rdev(sda2)
md/raid1:md1: active with 1 out of 2 mirrors
md1: detected capacity change from 0 to 1990397703168
md1: unknown partition table
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 9:0 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS (dm-0): Mounting Filesystem
XFS (dm-0): Ending clean mount
udevd[553]: starting version 175
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI Error: No handler for Region [IPMI] (ffff88021f24f300) [IPMI] (20110623/evregion-373)
ACPI Error: Region IPMI (ID=7) has no handler (20110623/exfldio-292)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88011b25f790), AE_NOT_EXIST (20110623/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88011b25f7e0), AE_NOT_EXIST (20110623/psparse-536)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20110623/power_meter-773)
input: PC Speaker as /devices/platform/pcspkr/input/input3
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
tpm_tis 00:09: 1.2 TPM (device-id 0x0, rev-id 78)
EDAC MC: Ver: 2.1.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 0).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Unbuffered DDR3 RAM
EDAC MC0: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:18.2
EDAC amd64: DRAM ECC enabled.
EDAC amd64: F10h detected (node 1).
EDAC MC: DCT0 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC MC: DCT1 chip selects:
EDAC amd64: MC: 0: 0MB 1: 0MB
EDAC amd64: MC: 2: 2048MB 3: 0MB
EDAC amd64: MC: 4: 0MB 5: 0MB
EDAC amd64: MC: 6: 0MB 7: 0MB
EDAC amd64: using x8 syndromes.
EDAC amd64: MCT channel count: 2
EDAC amd64: CS2: Unbuffered DDR3 RAM
EDAC MC1: Giving out device to 'amd64_edac' 'F10h': DEV 0000:00:19.2
EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x900, revision 0
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: mmio address 0xfec000f0 already in use
Adding 9764524k swap on /dev/md0. Priority:-1 extents:1 across:9764524k
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs (sde1): using internal journal
EXT3-fs (sde1): mounted filesystem with ordered data mode
XFS (dm-1): Mounting Filesystem
XFS (dm-1): Ending clean mount
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
XFS (dm-2): Mounting Filesystem
XFS (dm-2): Ending clean mount
XFS (dm-3): Mounting Filesystem
XFS (dm-3): Ending clean mount
XFS (dm-5): Mounting Filesystem
XFS (dm-5): Ending clean mount
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
bnx2 0000:02:00.0: irq 75 for MSI/MSI-X
bnx2 0000:02:00.0: irq 76 for MSI/MSI-X
bnx2 0000:02:00.0: irq 77 for MSI/MSI-X
bnx2 0000:02:00.0: irq 78 for MSI/MSI-X
bnx2 0000:02:00.0: irq 79 for MSI/MSI-X
bnx2 0000:02:00.0: irq 80 for MSI/MSI-X
bnx2 0000:02:00.0: irq 81 for MSI/MSI-X
bnx2 0000:02:00.0: irq 82 for MSI/MSI-X
bnx2 0000:02:00.0: irq 83 for MSI/MSI-X
bnx2 0000:02:00.0: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.17)
Bridge firewalling registered
ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
ADDRCONF(NETDEV_CHANGE): virbr0: link becomes ready
eth0: no IPv6 routers present
virbr0: port 1(vnet0) entering forwarding state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
virbr0: mixed no checksumming and other settings.
usb 4-1: USB disconnect, device number 2
bnx2 0000:02:00.0: eth0: NIC Copper Link is Down
bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
bnx2 0000:02:00.0: eth0: NIC Copper Link is Down
bnx2 0000:02:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
virbr0: mixed no checksumming and other settings.
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
virbr0: mixed no checksumming and other settings.
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
virbr0: mixed no checksumming and other settings.
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
virbr0: mixed no checksumming and other settings.
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
virbr0: port 1(vnet0) entering forwarding state
vnet0: no IPv6 routers present
powernow-k8: Found 2 AMD Opteron(tm) Processor 4180 (12 cpu cores) (version 2.20.00)
[Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[Firmware Bug]: powernow-k8: Try again with latest BIOS.
scsi_verify_blk_ioctl: 360 callbacks suppressed
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
Btrfs loaded
scsi_verify_blk_ioctl: 2 callbacks suppressed
blockdev: sending ioctl 125d to a partition!
blockdev: sending ioctl 125d to a partition!
blockdev: sending ioctl 125d to a partition!
blockdev: sending ioctl 125d to a partition!
i2c /dev entries driver